» Forum Index » 1/32nd and 1/24th Slot Car Forum » Topic: Gear Ratios |
|
Posted on 03/04/08 13:54:15 |
richard
Posts: 200 Reply |
Gear Ratios
_________________ |
Posted on 03/04/08 18:33:21 |
Chadly
Posts: 476 Reply |
Re: Gear Ratios
Whos gear chart is that? Inline and sidewinder pinions are exactly the same! You can get 48 pitch pinions from 7tooth-10tooth. 48 pitch 1/8th axel spur gears from 26tooth-over35tooth????? 48 pitch 1/8th axel crown gears from 26 tooth-over36tooth?????? 64 pitch pinions from 7tooth-15tooth 64 pitch 3/32 axel spurs from 35tooth-60tooth 64 pitch 3/32 axel crowns from 45tooth-60tooth just ask and i'll tell you what application each has |
Posted on 03/04/08 20:05:53 |
Karl
Posts: 261 Reply |
Re: Gear Ratios
What application does each of the gears have? |
Posted on 03/04/08 23:01:27 |
Monaro Doorslammer
Posts: 541 Reply |
Re: Gear Ratios
You dropped some of these... _________________ XSRDragRacing.com - Western Australian slot drag racing site XLR8Raceway.com - 1/32nd fun located in Bibra Lake |
Posted on 04/04/08 08:15:09 |
Chadly
Posts: 476 Reply |
Re: Gear Ratios
Basically any pinion for drag and circuit, any spurs/crowns below 35tooth for circuit (depending on wheel size) and any spurs/crowns above 45tooth for drags (depending on wheel size). Do ya want any more info specific? |
Posted on 04/04/08 08:41:18 |
richard
Posts: 200 Reply |
Re: Gear Ratios
Chad, et al, This was copied from armchairracers' site as a reference (bottom of page): http://www.armchairracer.com.au/v12/gears.htm Feel free to make a new/better one Cheers Richard _________________ |
Posted on 06/04/08 09:28:07 |
Chadly
Posts: 476 Reply |
Re: Gear Ratios
Oh, come on guys. Do a nice, hand written one up like i have. It takes 30 minutes but you'll be proud of it!!!! |