» Forum Index » Perth HO Slot Car Group » Topic: Mini SG+ for next meet |
|
Posted on 18/04/06 20:31:56 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
Yep, I've used Superglue for my first attempt, and the clip/body seem to have dried in a different position, so now my body is lop-sided (erm, not *my* body - the car ) ... might have to try drying it the right way up ... |
Posted on 18/04/06 20:39:47 |
Dave in Perth
Guest Reply |
Re: Mini SG+ for next meet
yeah I leave my car/body combo sitting on the track to dry.. |
Posted on 18/04/06 20:48:51 |
soccerkiddo3
Guest Reply |
Re: Mini SG+ for next meet
See, that's where the velcro helps. It can take me 3 or 4 attempts to get mine straight. |
Posted on 18/04/06 21:25:01 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
Is it possible to un-Superglue it and reseat? |
Posted on 19/04/06 08:29:51 |
soccerkiddo3
Guest Reply |
Re: Mini SG+ for next meet
I think any attempt to "unglue" would damage your paint work. I would cut it off as close to the glue as possible but leaving the bit that is glued to the paint undisturbed. I would then reconnect the clip using double sided tape or similar. If you can't get it to sit properly after you have cut it I can give you a replacement clip for you to stick in. But like I said I think try to remove the glued on bit could only damage your paint job. |
Posted on 19/04/06 21:04:57 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
Ok, that worked! I've put some pictures up: http://neophytte.mine.nu/photo/2006-04-19-building_HO_car/index.html Enjoy!!! |
Posted on 20/04/06 17:32:19 |
soccerkiddo3
Guest Reply |
Re: Mini SG+ for next meet
Doesn't look like a mini to me , or is it a very clever paint job ? Nice looking car though |
Posted on 20/04/06 21:01:45 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
Heh - this was my 'test' car to make sure I didn't make too many mistakes on the Mini Mini is yet to come ... |
Posted on 22/04/06 20:32:43 |
drew and Clair
Guest Reply |
Re: Mini SG+ for next meet
this is one of my examples |
Posted on 22/04/06 20:38:16 |
drew and Clair
Guest Reply |
Re: Mini SG+ for next meet
sorry the pic come out really big i think |
Posted on 23/04/06 10:54:11 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
I resized it for you Did you airbrush that? What's your technique? |
Posted on 23/04/06 13:37:32 |
drew and Clair
Guest Reply |
Re: Mini SG+ for next meet
just used a brush and i use tamiya paint cheers for the pic computa and me dont work together to well |
Posted on 24/04/06 14:14:44 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
Is that Enamel or Acrylic based paint?? |
Posted on 25/04/06 11:08:33 |
drew and Clair
Guest Reply |
Re: Mini SG+ for next meet
its for polycarbonate thats all it says |
Posted on 25/04/06 20:53:13 |
Dave in Perth
Guest Reply |
Re: Mini SG+ for next meet
notice on the paint pots the letters PC for polycarb, this is the stuff you want, other brands are Parma Faskolor and Pactra. |
Posted on 07/05/06 17:47:59 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
I was pretty happy with the way it turned out |
Posted on 07/05/06 17:48:41 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
|
Posted on 07/05/06 17:49:01 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
|
Posted on 07/05/06 17:49:25 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
|
Posted on 07/05/06 19:10:47 |
Richard
Guest Reply |
Re: Mini SG+ for next meet
The collection of the 12 mini's |
page: 1 2 3 last |