» Forum Index » Perth HO Slot Car Group » Topic: Cam's Track |
|
Posted on 09/07/06 18:59:51 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
Hey Guys ! Thanks to Angus, Dave, Drew & Jason for showing up on satruday night for a nice little session.. Pitty the pc's didnt want to play and we couldnt get an timing happening ! But that gave us the oppertunity to try new things ! Sorry for the poor pic quality, but if anyone is up for disco racing I know the place !! |
Posted on 09/07/06 19:02:19 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
The 2 out side lanes, yellow and red(pink) are actually fluro Posca pens, that glow under the UV Looks pretty cool, but looks better if the whole track between the rails is painted... The paint should be arriving during the week My Storm is the snot car, and it was actually pretty cool as the paint on it was water based and was slow to dry and on fast corners it would bleed off, and leave some "Predator" blood behind. |
Posted on 09/07/06 19:04:30 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
So today saw the start of some more permanent fixtures ! The wall has been created ! Its made from packing foam and seems to leave card board for dead when it comes to barriers ! Unless you dont like bouncy barriers |
Posted on 09/07/06 19:05:54 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
I was also bored with my fly over bridge, it was time for something more extreme ! |
Posted on 10/07/06 11:50:40 |
richard
Posts: 200 Reply |
Re: Cam's Track
Wow, that's looking great!! One 'feature' I saw on another track that you may want to consider (as you've got some spare space there) was they had the PC monitor in an enclosed section in the middle of the track. Excuse my crappy drawing, but I hope you get the idea from it _________________ Speeeeeeeeeeeeeeeeeed Racer |
Posted on 10/07/06 17:58:24 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
Just cos there is no track there doesnt make it spare The monitor actually sits rather well in the corner like it is, next pc upgrade will be an lcd montor, or a projector onto the side of the shed |
Posted on 10/07/06 19:15:39 |
richard
Posts: 200 Reply |
Re: Cam's Track
Yep, fair enuff _________________ Speeeeeeeeeeeeeeeeeed Racer |
Posted on 10/07/06 19:16:28 |
richard
Posts: 200 Reply |
Re: Cam's Track
I'm hoping to get a cheap 15" lcd for my setup .... _________________ Speeeeeeeeeeeeeeeeeed Racer |
Posted on 31/07/06 20:17:18 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
Wow, lane marking !! |
Posted on 31/07/06 20:18:03 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
and under UV light ! |
Posted on 31/07/06 20:19:57 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
I decided that 10 power taps was a good idea... and just for good measure i'm using 2mm cable to each tap ! and a 10mm feed from the supply to the main controller feeds ! And its not finished yet.. But more work has transpired since the pic ! |
Posted on 13/08/06 23:02:17 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
ROAD WORK AHEAD Bridge Under Repair ! |
Posted on 13/08/06 23:04:25 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
|
Posted on 13/08/06 23:05:35 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
The swing set frames actually go into the table... |
Posted on 13/08/06 23:09:08 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
gotta love XLR's 1/4 plug sockets going in soon for those in the dark ages |
Posted on 14/08/06 19:09:44 |
drew & clair
Posts: 358 Reply |
Re: Cam's Track
gotta love how high that bridge is!!! and the way down down dowwwnnnn |
Posted on 14/08/06 20:09:31 |
richard
Posts: 200 Reply |
Re: Cam's Track
yer, do the SG+ get air? _________________ |
Posted on 15/08/06 01:42:01 |
CamZH
Posts: 773 Reply |
Re: Cam's Track
they sure will if you go too hard ! you need to treat the decline as you would a 6" corner ! maybe even go slower ? i'm going to look into bending the track so there isnt such a sharp drop, as if you go over it too slowly the car stalls ! |
Posted on 15/08/06 07:35:52 |
richard
Posts: 200 Reply |
Re: Cam's Track
Good idea! I saw an article somewhere (maybe HOworld archives?) about making a hump bridge which you may want to read. I'll see if I can track it down .... _________________ |
Posted on 15/08/06 15:10:47 |
richard
Posts: 200 Reply |
Re: Cam's Track
Here is the article: http://www.howorld.net/archives/howto/brdglemn/bridge.html Attached in PDF (as HOworld articles can sometimes go "missing"). Enjoy!! [Attachment: Hump_bridge.pdf (32.08kb)] _________________ Speeeeeeeeeeeeeeeeeed Racer |
page: 1 2 3 4 5 6 7 8 9 last |