| » Forum Index » Perth HO Slot Car Group » Topic: Tyco Turbo Hopper |
|
Posted on 30/06/06 21:30:53 |
richard
 Posts: 200 Reply  |
Tyco Turbo Hopper
Anyone know how these machines come apart?? They seem to be held in by a 4 posts holding a spring in each ... 
 _________________ Speeeeeeeeeeeeeeeeeed Racer |
Posted on 30/06/06 21:39:23 |
|
drew & clair
Posts: 358 Reply  |
Re: Tyco Turbo Hopper
nar but they look kwel |
Posted on 30/06/06 21:50:27 |
|
Dave in Perth
Posts: 873 Reply  |
Re: Tyco Turbo Hopper
you gotta pull out those posts to get the body off.. 
I pulled the motor outta one thru the bottom of the chassis, might be easier than taking the body off. are those Goodyear tyres from a Hotwheels? |
Posted on 01/07/06 08:07:37 |
|
Karl
Posts: 261 Reply |
Re: Tyco Turbo Hopper
Hi Rich. Geoff has some of these and may know. Cheers Karl |
Posted on 01/07/06 10:24:51 |
|
soccerkiddo3
Posts: 207 Reply  |
Re: Tyco Turbo Hopper
As Dave said, you have to pull them apart. I don't normally suggest brute force but that is what it takes. You just have to be careful not to damage the body as you do it. While I did manage to get a motor out through the bottom, be buggered if I could get it to go back the same way. |
Posted on 01/07/06 21:29:28 |
|
richard
Posts: 200 Reply |
Re: Tyco Turbo Hopper
Hmmm, ok, might put these ones to one side for a while ....  _________________  |